This website uses cookies to ensure you get the best experience on our website. Learn more

3D Printing Will Make Nanomachines Not So Tiny Any More

They haven't been able to do much physical work ... until now.

By Chenfeng Ke, Dartmouth College

Nanomachines are tiny molecules – more than 10,000 lined up side by side would be narrower than the diameter of a human hair – that can move when they receive an external stimulus. They can already deliver medication within a body and serve as computer memories at the microscopic level. But as machines go, they haven’t been able to do much physical work – until now.

My lab has used nano-sized building blocks to design a smart material that can perform work at a macroscopic scale, visible to the eye. A 3-D-printed lattice cube made out of polymer can lift 15 times its own weight – the equivalent of a human being lifting a car.

Our polymer is able to lift an aluminum plate when chemical energy is added in the form of a solvent.

Nobel-winning roots are rotaxanes

The design of our new material is based on Nobel Prize-winning research that turned mechanically interlocked molecules into work-performing machines at nanoscale – things like molecular elevators and nanocars.

Rotaxanes are one of the most widely investigated of these molecules. These dumbbell-shaped molecules are capable of converting input energy – in the forms of light, heat or altered pH – into molecular movements. That’s how these kinds of molecular structures got the nickname “nanomachines.”

For example, in a molecule called [2]rotaxane, composed of one ring on an axle, the ring can move along the axle to perform shuttling motions.

Left, a [2]rotaxane. The ring can shuttle along the axle. Right, representation of billions of [2]rotaxanes in solution. The motions of nano-rings counteract macroscopically.

So far, harnessing the mechanical work of rotaxanes has been very challenging. When billions of these tiny machines are randomly oriented, the ring motions will cancel each other out, producing no useful work at a macroscale. In order to harness these molecular motions, scientists have to think about controlling their three-dimensional arrangement as well as synchronizing their motions.

Molecular beads on a string

Our design is based on a well-investigated family of molecules called polyrotaxanes. These have multiple rings on a molecular axle. In our new material, the ring is a cyclic sugar and the axle is a polymer.

Article continues below

It’s time to upgrade the way you get tech news. From game consoles to smartphone OSes to Apple’s latest gadget, Input is all about what’s coming next.
Subscribe:

If we provide an external stimulus – like adding water – these rings randomly shuttling back and forth can instead stick to each other and form a tubular array. When that happens, it changes the stiffness of the molecule. It’s like when beads are threaded onto a string; many beads slid together make the string much stronger, like a rod.

Cartoon presentation of a polyrotaxane. The rings are changed from the shuttling state, left, to the stationary state, right.

Our approach is to build a polymer system where billions of these molecules become stronger with added water. The strength of the whole architecture is increased and the structure can perform useful work.

In this way, we were able to get around the original problem of the random orientation of many nanomachines together. The addition of water locks them into a stationary state, therefore strengthening the whole 3-D architecture and allowing the united molecules to perform work together.

3-D printing the material

Our research is the first to add 3-D printability to mechanically interlocked molecules. It was integrating the 3-D printing technique that allowed us to transform the random shuttling motions of nano-sized rings into smart materials that perform work at macroscopic scale.

Getting the molecules all lined up in the right orientation is a way to amplify their motions. When we add water, the rings of the polyrotaxanes stick together via hydrogen bonds. The tubular arrays then stack together in a more ordered manner.

It’s much easier to get the molecules coordinated while they’re in this configuration as opposed to when the rings are all freely moving along the axle. We were able to successfully print lattice-like 3-D structures with the rings locked into position in this way. Now the molecules aren’t just randomly positioned within the material.

After 3-D-printing out the polymer, we used a photo-curing process – similar to the UV lamp that hardens nail polish at a salon – to cure it. We were left with a material that had good 3-D structural integrity and mechanical stability. Now it was ready to do some work.

Shape changing back and forth

The three-dimensional geometry of the polymer is crucial for its shape changing. A hollow structure is easier to deform than a solid one. So we designed a lattice cube structure to maximize its shape-deformation ability and, in turn, its ability to do work as it switched back and forth from one state to the other.

The next important step was being able to control the work our polymer could do.

It turns out the complex 3-D architecture of these structures can be reversibly deformed and reformed. We were able to use a solvent to switch the threaded ring structure between random shuttling and stationary states at the molecular level. Exchanging the solvent let us easily repeat this shape-changing and recovery behavior many times.

Squirting in solvent adds chemical energy to our polymer. As the solvent evaporated over time, the polyrotaxane returned to its original form.

This is how we converted chemical energy into mechanical work.

Just like moving beads to strengthen or weaken a string, this shape-changing is critical because it allows the amplification of molecular motion into macroscopic motion.

A 3-D printed lattice cube made of this smart material lifted a small coin 1.6 millimeters. The numbers may sound small for our day-to-day world, but this is a big step forward in the effort to get nanomachines doing macro work.

We hope this advance will enable scientists to further develop smart materials and devices. For example, by adding contraction and twisting to the rising motion, molecular machines could be used as soft robots performing complicated tasks similar to what a human hand can do.

Chenfeng Ke, Assistant Professor of Chemistry, Dartmouth College.

This article was originally published on The Conversation. Read the original article.

Instagram Top Nine: how to access your best posts and photos of 2019

The Top Nine tool is back to provide users with a breakdown of their year.

One of Instagram’s biggest trends has returned: the top nine collage.

The service launched four years ago, and received a major boost when the inventor of the hashtag, Chris Messina, shared the Top Nine tool on Product Hunt. From there, people have been using this unique tool to show off the highlights of their year: the best brunches, the most brilliant beaches, the most captivating clips.

Tesla Cyberquad: specs, release date and details of all-electric ATV

The Cybertruck received a surprise addition after its unveiling.

Oh wait! We have uh…” Tesla CEO Elon Musk said toward the end of Tesla’s all-electric Cybertruck launch. “We made a, uh, we also made an ATV.”

Moments later, a Tesla representative rolled out perhaps one of the company’s most unexpected vehicles in its history. The ATV — later described as a “Cyberquad” on Tesla’s website — rolled out onto the stage, before rolling onto the back of the just-announced Cybertruck. Musk later confirmed on Twitter that the ATV would be a two-person vehicle available first as an option for the Cybertruck. Beyond those small initial details, little else is known about the company’s first foray into this type of vehicle.

You may hate Elon Musk, but the Cybertruck is good

Grimes' boyfriend just fucked up the auto industry again.

I don’t particularly like Elon Musk as a person, but in October, I bought (well, leased) one of his cars. I didn’t want to drive a gas-powered car anymore, both because fossil fuels are destroying the planet and because I am extremely lazy and tired of having to stop somewhere and put gas into my car. I ended up with a Tesla because there is literally no other car like it on the market — both in terms of how it performs in regards to range and drive, and how advanced its internal design and operation is. It is a once-in-a-lifetime, industry-defining vehicle. It really has no competition. My only problem with it, really, is that it looks too much like a regular car.

Tesla Cybertruck: 20 coolest photos and videos of the striking pickup truck

Tesla's latest electric vehicle comes with a surprising design.

Tesla’s Cybertruck is finally here. At a dazzling event at the Tesla Design Studio in Los Angeles on Thursday evening, CEO Elon Musk unveiled the vehicle he’d teased for several months prior as his personal passion project.

“You can order right now if you like,” Musk declared, before announcing a new order website.

Tesla Cybertruck pics, price: "Doesn't look like anything else," Elon Musk says

"Welcome to the cybertruck unveil!"

They hit its steel alloy body with a sledgehammer. They shot it with a 9-millimeter handgun gun. They showed off the toughness of its glass by dropping weights on it from a decent height. And they did it dressed as macho cybergoths.

This was the Tesla Cybertruck unveiling on Thursday night.